Standard: JT/T 808-2013 (2013 Edition)
Terminal Configuration
Terminal Parameters Catalog (Table 3)
Standard range 0x0001 - 0xEFFF originates from national standard JT/T 808-2013. Extended range 0xF000 - 0xFFFF represents proprietary telematics parameters engineered for Jimi VL502.
Total Parameters: 100 / 100
| Parameter ID | Data Type | Description & Default Settings | Default Value |
|---|---|---|---|
| 0xF000-0xFFFF | DWORD | User-defined extended parameter range for Jimi IoT / Concox VL502 terminal. | - |
| 0xF000-0xF1FF | DWORD | Terminal attributes, hardware info, and network management parameters. | - |
| 0x0001 | DWORD | Terminal heartbeat sending interval. Unit: seconds (s). Default: 30. | 30 |
| 0x0002 | DWORD | TCP message response timeout interval. Unit: seconds (s). Default: 5. | 5 |
| 0x0003 | DWORD | TCP message retransmission times when acknowledgement is not received. Default: 3. | 3 |
| 0x0010 | STRING | Master server APN, wireless communication dial-up access point. If CDMA, PPP dial-up number applies. | - |
| 0x0011 | STRING | Username for master server APN dial-up authentication. | - |
| 0x0012 | STRING | Password for master server APN dial-up authentication. | - |
| 0x0013 | STRING | Master server address (IP address or domain name). | - |
| 0x0018 | DWORD | Master server TCP listening port. | - |
| 0x0081 | DWORD | Province ID where the vehicle is registered. | - |
| 0x0082 | DWORD | City or county ID where the vehicle is registered. | - |
| 0x0083 | STRING | Motor vehicle license plate issued by the traffic management department. | - |
| 0x0084 | BYTE | License plate color code (JT/T 415-2006): 0x00: Unlicensed, 0x01: Blue, 0x02: Yellow, 0x03: Black, 0x04: White, 0x05: Green, 0x09: Other. | - |
| 0xF000 | WORD | Device manufacturer code (Read-only). | - |
| 0xF001 | WORD | Authentication security level: 0x0001: SN only, default: SN + ICCID, or SN + ICCID + vehicle info. | - |
| 0xF002 | DWORD | Terminal Serial Number (SN) in BCD[6] format (Read-only). | - |
| 0xF003 | BYTE | Terminal model/type code in BYTE[5] format (Read-only). | - |
| 0xF004 | BYTE | Terminal unique hardware ID in BYTE[7] format (Read-only). | - |
| 0xF005 | STRING | Terminal hardware revision version number (Read-only). | - |
| 0xF006 | STRING | Terminal system software/firmware version number (Read-only). | - |
| 0xF007 | STRING | IMEI, IMSI, and ICCID of the SIM card (Read-only, format: IMEI:xxx;IMSI:xxx;ICCID:xxx;). | - |
| 0xF008 | STRING | FTP server parameters for FOTA remote firmware upgrade: IP, port, username, password. | - |
| 0xF009 | DWORD | Fuel/oil consumption correction factor. | - |
| 0xF00A | DWORD | Odometer mileage correction factor. | - |
| 0xF00B | DWORD | Initial accumulated fuel volume baseline (calculated in Liters). | - |
| 0xF00C | DWORD | Initial accumulated odometer mileage baseline (in Kilometers). | - |
| 0xF00D | DWORD | Vehicle type code: High 16-bit for commercial vehicles, Low 16-bit for passenger cars (Table 5). | - |
| 0xF00E | DWORD | Reporting interval for OBD data stream transparent transmission. Unit: seconds (s). | - |
| 0xF00F | BYTE | Sub-categories of uplink transparent messages: 0x01: OBD stream, 0x02: DTC trouble codes, 0x03: Alarm & driving behavior, 0x04: Trip data, 0x06: CAN learning data. | - |
| 0xF010 | BYTE | Terminal registration state: 0: Not registered, 1: Registered. | - |
| 0xF011 | DWORD | Hardware fault mask bitmask. All 0 indicates normal hardware condition (Read-only). | - |
| 0xF012 | BYTE | Geofence shape configuration: 0x00: Circular, 0x01: Rectangular. | - |
| 0xF013 | BYTE | Clear OBD diagnostic trouble codes (DTC). Set to 0x01 from platform to execute clear. | - |
| 0xF015 | BYTE | Vehicle diagnostic self-check control (0x01 to trigger check). | - |
| 0xF016 | BYTE | OBD communication and diagnosis master switch: 0x00: Disable, 0x01: Enable (default). | 0x01 |
| 0xF017 | BYTE | Diagnostic protocol communication switch: 0x00: Disable, 0x01: Enable. | - |
| 0xF018 | BYTE | Sign flags for latitude (North/South) and longitude (East/West) of Geofence. | - |
| 0xF019 | BYTE | Remote GNSS/GPS power switch: 0x00: Off, 0x01: On (default). | 0x01 |
| 0xF01A | BYTE | Terminal WiFi hotspot switch: 0x00: Off, 0x01: On (default). | 0x01 |
| 0xF01B | BYTE | Reset WiFi SSID and password to default values (0x01 to execute). | - |
| 0xF01C | STRING | Configuration string for WiFi SSID and password (Format: SSID:xxx;PASS:xxx;). | - |
| 0xF01D | STRING | Secondary network APN channel address. | - |
| 0xF01E | STRING | Target server URL path for uploading terminal system debug logs. | - |
| 0xF01F | BYTE | Vehicle anti-theft security switch: 0x00: Off (default), 0x01: Armed/On, 0xFF: Not supported. | 0x00 |
| 0xF020 | BYTE | Data encryption toggle: 0x00: Non-encrypted, 0x01: Encrypted payload. | 0x00 |
| 0xF021 | STRING | Configuration parameters for external connected peripherals (RS232/RS485 sensor). | - |
| 0xF022 | STRING | Query message format for external peripheral parameters (Read-only). | - |
| 0xF023 | BYTE | Alarm threshold parameters for abnormal fuel level drop/theft detection. | - |
| 0xF024 | BYTE | NB-IoT network sharing mode: 0x00: Not shared, 0x01: Shared. | - |
| 0xF025 | STRING | 17-character standard Vehicle Identification Number (VIN). | - |
| 0x0020 | DWORD | Position reporting strategy: 0: By time interval, 1: By distance interval, 2: Combined time & distance. | 0 |
| 0x0021 | DWORD | Position reporting condition: 0: Depends on ACC state, 1: Depends on login and ACC state. | 1 |
| 0x0027 | DWORD | Reporting interval when terminal is in sleep mode. Unit: seconds (s), default: 3600. | 3600 |
| 0x0028 | DWORD | Reporting interval when emergency SOS alarm is active. Unit: seconds (s), default: 5. | 5 |
| 0x0029 | DWORD | Default regular position reporting interval. Unit: seconds (s), default: 10. | 10 |
| 0x002C | DWORD | Default distance interval for position reporting. Unit: meters (m), default: 50. | 50 |
| 0x002E | DWORD | Distance reporting interval during sleep mode. Unit: meters (m), default: 50. | 50 |
| 0x002F | DWORD | Distance reporting interval during emergency alarm. Unit: meters (m), default: 20. | 20 |
| 0x0030 | DWORD | Heading turning angle threshold for additional position report point: <180 deg, default: 30. | 30 |
| 0x0031 | WORD | Illegal displacement / geofence alert radius threshold. Unit: meters (m), default: 500. | 500 |
| 0x0050 | DWORD | Alarm mask word: Bitmask corresponding to alarm flags in 0x0200. Bit set to 1 masks the alarm. | - |
| 0x0055 | DWORD | Over-speed limit threshold. Unit: km/h, default: 100/120. | 100 |
| 0x0056 | DWORD | Duration threshold for over-speed condition before triggering alarm. Unit: seconds (s), default: 30. | 30 |
| 0x0057 | DWORD | Fatigue driving continuous driving time threshold. Unit: seconds (s), default: 4 hours (14400s). | 14400 |
| 0x0058 | DWORD | Fatigue driving cumulative driving time per day threshold. Unit: seconds (s), default: 8 hours (28800s). | 28800 |
| 0x0059 | DWORD | Minimum mandatory rest time to reset continuous driving counter. Unit: seconds (s), default: 20 min (1200s). | 1200 |
| 0x005A | DWORD | Maximum allowable parking duration without ignition off. Unit: seconds (s), default: 3600s. | 3600 |
| 0x005B | WORD | Differential pre-warning value before speed alert is triggered. Unit: 1/10 km/h, default: 10 (1 km/h). | 10 |
| 0x005C | WORD | Differential pre-warning time before fatigue driving alert triggers. Unit: seconds (s), default: 1800s (30m). | 1800 |
| 0x005D | WORD | Vehicle collision crash alert parameters: b7-b0: Duration (4ms unit); b15-b8: Acceleration (0.1g unit, default 10 = 1.0g). | 10 |
| 0x005E | WORD | Vehicle rollover inclination angle threshold. Unit: degrees, default: 30 degrees. | 30 |
| 0xF200 | BYTE | User-defined alarm mask word for VL502 driving behavior and telematics events. | - |
| 0xF201 | DWORD | High battery/input voltage alarm threshold. Unit: mV, default: 15000/28000 mV. | 15000 |
| 0xF202 | DWORD | Low battery/input voltage alarm threshold. Unit: mV, default: 10800/20000 mV. | 10800 |
| 0xF203 | WORD | High engine coolant water temperature alarm threshold. Unit: °C, default: 120°C. | 120 |
| 0xF204 | WORD | Low engine coolant water temperature alarm threshold. Unit: °C, default: 60°C. | 60 |
| 0xF205 | WORD | High engine oil temperature alarm threshold. Unit: °C. | - |
| 0xF206 | WORD | High fuel temperature alarm threshold. Unit: °C. | - |
| 0xF207 | WORD | High engine oil pressure alarm threshold. Unit: kPa. | - |
| 0xF208 | WORD | Engine preheating duration alarm threshold. Unit: minutes, default: 10 min. | 10 |
| 0xF209 | WORD | Engine excessive idling duration alarm threshold. Unit: minutes, default: 20 min. | 20 |
| 0xF20A | BYTE | Rapid throttle opening / aggressive acceleration threshold. Default: 40% pedal travel. | 40% |
| 0xF20B | WORD | Sudden harsh acceleration speed delta threshold. Unit: km/h, default: 40 km/h. | 40 |
| 0xF20C | WORD | Sudden harsh braking deceleration speed delta threshold. Unit: km/h, default: 60 km/h. | 60 |
| 0xF20D | WORD | Sharp turn / aggressive cornering angle threshold. Unit: degrees, default: 60 degrees. | 60 |
| 0xF20E | WORD | High engine RPM alarm threshold. Unit: RPM, default: 2500 (diesel) / 3500 (petrol) RPM. | 2500 |
| 0xF20F | DWORD | Latitude of circular geofence center point (multiplied by 10^6). | - |
| 0xF210 | DWORD | Longitude of circular geofence center point (multiplied by 10^6). | - |
| 0xF211 | DWORD | Latitude of top-left corner (Point 1) of rectangular geofence (multiplied by 10^6). | - |
| 0xF212 | DWORD | Longitude of top-left corner (Point 1) of rectangular geofence (multiplied by 10^6). | - |
| 0xF213 | DWORD | Latitude of bottom-right corner (Point 2) of rectangular geofence (multiplied by 10^6). | - |
| 0xF214 | DWORD | Longitude of bottom-right corner (Point 2) of rectangular geofence (multiplied by 10^6). | - |
| 0xF215 | BYTE | Vibration / G-Sensor alarm trigger threshold. Unit: 0.1g, range: 1 - 10. | 5 |
| 0xF216 | WORD | Secondary harsh braking deceleration threshold. Unit: km/h. | - |
| 0xF217 | WORD | Initial vehicle speed threshold required to trigger harsh braking evaluation. Unit: km/h. | - |
| 0xF218 | WORD | Vehicle speed threshold required to trigger sharp turn evaluation. Unit: km/h. | - |
| 0xF219 | WORD | Duration threshold for evaluating sharp turn condition. Unit: seconds (s), default: 2s. | 2 |
| 0x595A | WORD | Default terminal manufacturer code (0x595A represents Concox / Jimi IoT). | 0x595A |
| 0x0002 | WORD | Terminal authentication level: 0x0001: SN only, default: SN + SIM ICCID. | SN+ICCID |