Chapter 6
Standard: JT/T 808-2013
Communication Links
Link establishment, heartbeat maintenance (0x0002), and TCP socket disconnection management.
Communication Links
6.1 Link Establishment#
TCP or UDP shall be used for data links between the vehicle terminal and the telematics platform:
The terminal must establish a connection to the platform immediately after device power-on or microcontroller reset.
Upon successful socket connection, the terminal transmits a login authentication message (
0x0102) containing the registration base key.6.2 Link Maintenance (Heartbeat)#
After authentication, the terminal must periodically transmit heartbeat messages (
0x0002) to verify link health.The platform replies with a general response (
0x8001).The heartbeat period is configurable via parameter
0x0001 (default: 30 seconds).6.3 Link Disconnection Detection#
Either the platform or the terminal can disconnect the links based on the TCP protocol:
Platform disconnection detection criteria:
Explicit TCP FIN/RST packet received from terminal;
A new TCP socket connection is initiated for the same terminal IMEI/SN, invalidating the previous socket;
No message (heartbeat or location) is received from the terminal for a timeout period (heartbeat interval ร retry count).
Terminal disconnection detection criteria:
Explicit TCP FIN/RST packet received from platform;
Cellular carrier PPP/PDP context disconnection;
Socket write failure or absence of platform response after reaching maximum retransmission limit.