Chapter 7
Standard: JT/T 808-2013

Message Processing

General acknowledgement response (0x8001/0x0001), packet retransmission timeouts, and anti-loss mechanisms.

Message Processing

7.1 Messages Sent by the Platform
#

All messages sent by the platform shall be acknowledged by the terminal with either a general response (0x0001) or a dedicated response message defined in the protocol:

If the terminal does not respond within the timeout window, the platform must retransmit the packet.
Retransmission timeout interval and retry count are determined by server-side parameters.

7.2 Messages Sent by the Terminal
#

When data links are active, all messages sent by the terminal require platform acknowledgement (0x8001 or specialized response).
If no response is received before timeout, the terminal retransmits according to configured retry counts.
Key Alarm Messages: For critical alarm events (e.g. SOS, collision, geofence breach), if no acknowledgement is received after reaching maximum retries, the terminal must cache the event in FLASH memory and prioritize sending it upon next reconnection before other normal messages.
When cellular signal is lost or links fail, the terminal must automatically switch to offline buffering mode.
All location and alarm packets are sequentially saved into non-volatile FLASH.
When network connectivity is restored, the buffered records are reported in FIFO order.